DJ Inc. certifies to the first end-user purchaser that this DJ Safety products are free from defects in material and manufacture under normal use for two (2) years from date of manufacture. If this product is found to be defective in material or manufacturer during this warranty period, DJ Safety’s entire liability, and the purchaser’s exclusive remedy shall be, at DJ Safety’s option (a) repair, or (b) replacement of product, or (c) refund of the purchase price of the product, which is returned to DJ Safety with proof of purchase. If failure of the product has resulted from misuse, abuse, accident, neglect or mishandling, modification of any kind (bending hardware, welding, etc.), DJ Safety shall have no responsibility to repair or replace the product or refund the purchase price.

For warranty service, contact the dealer or DJ Safety.

THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NEITHER DJ Safety NOR ANYONE ELSE WHO HAS BEEN INVOLVED IN THE SALE OR DELIVERY OF THIS PRODUCT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, REVENUE OR BUSINESS AND THE LIKE) IN ANY WAY RELATED TO THE PRODUCT. THE FOREGOING LANGUAGE CANNOT BE WAIVED, MODIFIED, OR SUPPLEMENTED IN ANY MANNER WHATSOEVER EXCEPT BY A WRITTEN LETTER SIGNED BY OFFICERS OF DJ Safety.

The General Installation Tips of DJ Safety are to be used as guidelines ONLY. The seatbelts must be installed as required by the Sanctioning Associations for the particular vehicle and it’s use.  All seatbelts, lap belts, shoulder harnesses and anti-submarine belts meet or exceed the revised SFI 16-1 testing specifications. Useful life of the webbing should not exceed two (2) years and is recommended that they be replaced at or before that time. If these seatbelts are involved in an accident or the webbing shows wear or abuse, return to DJ Safety for inspection or replacement. All hardware on lap belts,
shoulder harness and anti-submarine belts are not to be welded on, bent or straightened as this will cause fracture.

GENERAL SEATBELT OPERATION/ADJUSTMENTS: The lap belt must be installed across the lower hip area. The shoulder harness, roller adjuster should be located about 1” above the breast nipple. The anti-submarine belt must be adjusted to keep the lap belt around the lower hip area when the shoulder harness is tightened. Sequence of tighten belts; ALWAYS tighten the lap belt first. Then tighten the shoulder harness. Again, the Anti-submarine belt should not allow the lap belt to move up the hips when tightening the shoulder harness.